Home :: MEGA TCT Hole Saws :: BLUE BOAR 2-9/16" (65mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

BLUE BOAR 2-9/16" (65mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

BLUE BOAR 2-9/16" (65mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

Technical Details

  • 2-9/16" (65mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
  • 3 TCT carbide teeth
  • New dovetail tooth mount and thicker side wall for greater strength and durability
  • Unique tungsten carbide tooth design allows fast plug removal
  • TCT Hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws
  • Use any standard 5/8"-18 thread 2-pin hole saw arbor and any standard 3-3/4" or longer pilot bit
  • Carbide tipped teeth quickly cut holes in materials that standard bi-metal hole saws will not cut
  • Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
  • Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off.
  • USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

***Unique tungsten carbide tooth design***

  • IMPORTANT: We do not recommend using a corded heavy duty drill with these hole cutters nor are they needed. With no sidewall friction to overcome even the largest diameter hole cutters can be used with a cordless drill. These new highly efficient hole cutters require a different approach to maximize their life. They should be used with a 18v cordless drill with the screw setting when available. It will not slow down the cutting operation. With a 3-speed range cordless drill the middle setting works the best for all sizes.
26%
Details
SKU HP1625
Ship Weight 0.80 lbs
 
Market price: $38.10
Our price: $28.20
Options
Quantity
: *
: *
: *
 
 
BLUE BOAR Stabilizing Rubber Square for 4-1/4" or 4-1/2" Core Bit
HOLE PRO Shield Vacuum Adapter for all HOLE PRO shields
HOLE PRO Hole Saw Shield & Arbor Adapter -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6-1/4" diameter
BLUE BOAR Stabilizing Rubber Square for 4-1/4" or 4-1/2" Core Bit HOLE PRO Shield Vacuum Adapter for all HOLE PRO shields HOLE PRO Hole Saw Shield & Arbor Adapter -use with any 1/2" or 5/8" threaded hole saw up to 2-1/2" deep and 6-1/4" diameter
$8.95
$22.95
$96.90
 
BLUE BOAR Heavy Duty 7/16-inch shank Dual Arbor Mandrel Kit
BLUE BOAR 1-1/2" (38mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 2-1/4" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR Heavy Duty 7/16-inch shank Dual Arbor Mandrel Kit BLUE BOAR 1-1/2" (38mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 2-1/4" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
$12.99
$17.75
$25.40
 
BLUE BOAR 4-1/2" (115mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 1/4" x 3-7/8" TCT Tungsten Carbide Brad Point Pilot bit  for hard woods, Plywood, MDF, Chipboard, OSB, Ipe
4-1/4" (108mm) BLUE BOAR Dry Cutting Diamond Core Bit
BLUE BOAR 4-1/2" (115mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 1/4" x 3-7/8" TCT Tungsten Carbide Brad Point Pilot bit for hard woods, Plywood, MDF, Chipboard, OSB, Ipe 4-1/4" (108mm) BLUE BOAR Dry Cutting Diamond Core Bit
$49.25
$6.99
$99.95