Home :: MEGA TCT Hole Saws :: BLUE BOAR 3" (76mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

BLUE BOAR 3" (76mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

BLUE BOAR 3" (76mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

Technical Details

  • 3" (76mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
  • 3 or more TCT carbide teeth
  • New dovetail tooth mount and thicker side wall for greater strength and durability
  • Unique tungsten carbide tooth design resists damage from nail strikes
  • TCT Hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws
  • Use any 5/8"-18 thread 2-pin hole saw arbor and any standard 3-3/4" or longer pilot bit
  • Carbide tipped teeth quickly cut holes in materials that standard bi-metal hole saws will not cut
  • Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
  • Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off.
  • USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

***NAIL resistant ***

  • IMPORTANT: We do not recommend using a corded heavy duty drill with these hole cutters nor are they needed. With no sidewall friction to overcome even the largest diameter hole cutters can be used with a cordless drill. These new highly efficient hole cutters require a different approach to maximize their life. They should be used with a 18v cordless drill with the screw setting where nails may be hit. The drill clutch will only slip if a nail is hit and this saves the teeth from much of the impact as well as the user's wrists. It will not slow down the cutting operation. With a 3-speed range cordless drill the middle setting works the best for all sizes.
26%
Details
SKU HP1628
Ship Weight 0.90 lbs
 
Market price: $45.90
Our price: $34.00
Options
Quantity
: *
: *
: *
 
 
BLUE BOAR 1/4" x 3-3/4" Flat Wood Spade Pilot Bit
BLUE BOAR 5/16"  x 4-1/8 Pilot Bit
BLUE BOAR 3/8" (10mm) x 4-1/8 Pilot Bit
BLUE BOAR 1/4" x 3-3/4" Flat Wood Spade Pilot Bit BLUE BOAR 5/16" x 4-1/8 Pilot Bit BLUE BOAR 3/8" (10mm) x 4-1/8 Pilot Bit
$3.89
$4.99
$6.99
 
BLUE BOAR Heavy Duty 7/16-inch shank Dual Arbor Mandrel Kit
Blue Boar(R) MEGA TCT Master Combo Kit
BLUE BOAR 2-1/2" (64mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR Heavy Duty 7/16-inch shank Dual Arbor Mandrel Kit Blue Boar(R) MEGA TCT Master Combo Kit BLUE BOAR 2-1/2" (64mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
$12.99
$134.95
$27.90
 
BLUE BOAR 4-1/4" (108mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 1/4" x 3-7/8" TCT Tungsten Carbide Brad Point Pilot bit  for hard woods, Plywood, MDF, Chipboard, OSB, Ipe
BLUE BOAR 3” (76mm) Stucco, Fiberglass & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring
BLUE BOAR 4-1/4" (108mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 1/4" x 3-7/8" TCT Tungsten Carbide Brad Point Pilot bit for hard woods, Plywood, MDF, Chipboard, OSB, Ipe BLUE BOAR 3” (76mm) Stucco, Fiberglass & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring
$47.35
$6.99
$78.95