Home :: MEGA TCT Hole Saws :: BLUE BOAR 5-3/4" (146mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

BLUE BOAR 5-3/4" (146mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

BLUE BOAR 5-3/4" (146mm) MEGA Tungsten Carbide 2-1/4" deep hole saw

Technical Details

  • 5-3/4" (146mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
  • 3 or more TCT carbide teeth
  • New dovetail tooth mount and thicker side wall for greater strength and durability
  • Unique tungsten carbide tooth design allows fast plug removal
  • TCT Hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws
  • Use any standard 5/8"-18 thread 2-pin hole saw arbor and any standard 3-3/4" or longer pilot bit
  • Carbide tipped teeth quickly cut holes in materials that standard bi-metal hole saws will not cut
  • Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
  • Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off.
  • USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

***Unique tungsten carbide tooth design ***

  • IMPORTANT: We do not recommend using a corded heavy duty drill with these hole cutters nor are they needed. With no sidewall friction to overcome even the largest diameter hole cutters can be used with a cordless drill. These new highly efficient hole cutters require a different approach to maximize their life. They should be used with a 18v cordless drill with the screw setting when available. It will not slow down the cutting operation. With a 3-speed range cordless drill the middle setting works the best for all sizes.
26%
Details
SKU HP1641
Ship Weight 3.20 lbs
 
Market price: $81.25
Our price: $60.15
Options
Quantity
: *
: *
: *
 
 
BLUE BOAR 2-5/8” (67mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring
BLUE BOAR Metal Pro Hole Cutter 1-1/8" (29mm) for sheet metal, stainless, iron, brass
BLUE BOAR Heavy Duty 7/16-inch shank Dual Arbor Mandrel Kit
BLUE BOAR 2-5/8” (67mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring BLUE BOAR Metal Pro Hole Cutter 1-1/8" (29mm) for sheet metal, stainless, iron, brass BLUE BOAR Heavy Duty 7/16-inch shank Dual Arbor Mandrel Kit
$71.95
$28.95
$12.99
 
HOLE PRO Replacement XL Arbor Pilot Bit 6mm - for HP1168
Blue Boar(R) MEGA TCT Master Combo Kit
BLUE BOAR 2" (51mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
HOLE PRO Replacement XL Arbor Pilot Bit 6mm - for HP1168 Blue Boar(R) MEGA TCT Master Combo Kit BLUE BOAR 2" (51mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
$8.50
$134.95
$23.00
 
BLUE BOAR 4-1/8" (105mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 4-1/2" (115mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Blue Boar Carbide Grit Hole Saw 4-3/8” dia for 4 inch can lights
BLUE BOAR 4-1/8" (105mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 4-1/2" (115mm) MEGA Tungsten Carbide 2-1/4" deep hole saw Blue Boar Carbide Grit Hole Saw 4-3/8” dia for 4 inch can lights
$46.40
$49.25
$21.95