Home :: MEGA TCT Hole Saws

MEGA TCT Hole Saws

New third generation hole cutter design!

  • New dovetail tooth mount and thicker side wall for greater strength and durability
  • Unique tungsten carbide tooth design resists damage from nail strikes
  • Wide range of 35 different sizes from 5/8" to 6-1/4" diameter
  • Designed to nest so more cutters fit inside a carry case and easy to add special purpose metal or ceramic cutting hole cutters to the MEGA TCT kits
  • 3x larger holes using hand drills!
  • Cut 40x more holes per charge with cordless drills
  • Cut holes in 1/10 the time
  • Cut 6" holes in 1" thick plywood with 18v cordless drills
  • Tough Tungsten Carbide teeth extend past inside and outside walls for reduced friction and much faster cutting
  • Large side gullet slots for fast chip removal and fast plug removal
  • Ultra Deep 2-1/4" cutting depth
  • Use with standard hole saw arbors
  • Thin sidewalls make it easy to add them to existing hole saw kits
  • Uses standard length 3-3/4" pilot drill bits and the new tungsten carbide tipped pilot bits for wood and engineered wood (MDF, particle board, etc.)

Materials Cut

  • Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials

***NAIL resistant ***

  • IMPORTANT: We do not recommend using a corded heavy duty drill with these hole cutters nor are they needed. With no sidewall friction to overcome even the largest diameter hole cutters can be used with a cordless drill. These new highly efficient hole cutters require a different approach to maximize their life. They should be used with a 18v cordless drill with the screw setting where nails may be hit. The drill clutch will only slip if a nail is hit and this saves the teeth from much of the impact as well as the user's wrists. It will not slow down the cutting operation. With a 3-speed range cordless drill the middle setting works the best for all sizes.

 

Products

Sort by: SKU Product Price
  •  per page
BLUE BOAR Starter Case Kit BLUE BOAR Heavy Duty 7/16-inch shank Quick Change Dual Arbor Mandrel Kit for Hole Saws from 5/8 to 7 diameter, with both 5/8-18 and -20 thread mounts BLUE BOAR 1/4" x 3-7/8" TCT Tungsten Carbide Brad Point Pilot bit for hard woods, Plywood, MDF, Chipboard, OSB, Ipe
SKU: HP1596
SKU: HP1597
SKU: HP1598
BLUE BOAR Starter Case Kit
BLUE BOAR Heavy Duty 7/16-inch shank Quick Change Dual Arbor Mandrel Kit for Hole Saws from 5/8 to 7 diameter, with both 5/8-18 and -20 thread mounts
BLUE BOAR 1/4" x 3-7/8" TCT Tungsten Carbide Brad Point Pilot bit  for hard woods, Plywood, MDF, Chipboard, OSB, Ipe
Our price: $20.95
Market price: $59.99 save 65%
Our price: $12.99
Market price: $16.99 save 24%
Our price: $6.99
Market price: $8.99 save 22%
Quantity
Quantity
Quantity
 
BLUE BOAR 1/4" x 4-1/4" TCT Tungsten Carbide Brad Point Pilot bit for hard woods, Plywood, MDF, Chipboard, OSB, Ipe BLUE BOAR 5/8" (16mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 3/4" (19mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1599
SKU: HP1609
SKU: HP1610
BLUE BOAR 1/4" x 4-1/4" TCT Tungsten Carbide Brad Point Pilot bit  for hard woods, Plywood, MDF, Chipboard, OSB, Ipe
BLUE BOAR 5/8" (16mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 3/4" (19mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $7.49
Market price: $9.49 save 21%
Our price: $10.20
Market price: $13.80 save 26%
Our price: $10.45
Market price: $14.15 save 26%
Quantity
Quantity
Quantity
 
BLUE BOAR 7/8" (22mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 1" (25mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 1-1/8" (29mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1611
SKU: HP1612
SKU: HP1613
BLUE BOAR 7/8" (22mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 1" (25mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 1-1/8" (29mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $11.20
Market price: $15.15 save 26%
Our price: $12.00
Market price: $16.20 save 26%
Our price: $14.05
Market price: $19.00 save 26%
Quantity
Quantity
Quantity
 
BLUE BOAR 1-1/4" (32mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 1-3/8" (35mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 1-1/2" (38mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1614
SKU: HP1615
SKU: HP1616
BLUE BOAR 1-1/4" (32mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 1-3/8" (35mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 1-1/2" (38mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $15.35
Market price: $20.75 save 26%
Our price: $17.05
Market price: $23.05 save 26%
Our price: $17.75
Market price: $24.00 save 26%
Quantity
Quantity
Quantity
 
BLUE BOAR 1-5/8" (41mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 1-3/4" (45mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 1-7/8" (48mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1617
SKU: HP1618
SKU: HP1619
BLUE BOAR 1-5/8" (41mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 1-3/4" (45mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 1-7/8" (48mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $19.45
Market price: $26.30 save 26%
Our price: $20.05
Market price: $27.10 save 26%
Our price: $21.20
Market price: $28.65 save 26%
Quantity
Quantity
Quantity
 
BLUE BOAR 2" (51mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 2-1/16" (52mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 2-1/8" (54mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1620
SKU: HP1621
SKU: HP1622
BLUE BOAR 2" (51mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 2-1/16" (52mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 2-1/8" (54mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $23.00
Market price: $31.05 save 26%
Our price: $23.60
Market price: $31.90 save 26%
Our price: $24.20
Market price: $32.70 save 26%
Quantity
Quantity
Quantity
 
BLUE BOAR 2-1/4" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 2-1/2" (64mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 2-9/16" (65mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1623
SKU: HP1624
SKU: HP1625
BLUE BOAR 2-1/4" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 2-1/2" (64mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 2-9/16" (65mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $25.40
Market price: $34.30 save 26%
Our price: $27.90
Market price: $37.70 save 26%
Our price: $28.20
Market price: $38.10 save 26%
Quantity
Quantity
Quantity
 
BLUE BOAR 2-5/8" (67mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 2-3/4" (70mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 3" (76mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1626
SKU: HP1627
SKU: HP1628
BLUE BOAR 2-5/8" (67mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 2-3/4" (70mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 3" (76mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $29.10
Market price: $39.30 save 26%
Our price: $31.50
Market price: $42.55 save 26%
Our price: $34.00
Market price: $45.90 save 26%
Quantity
Quantity
Quantity
 
BLUE BOAR 3-1/8" (80mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 3-3/8" (86mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 3-1/2" (89mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1629
SKU: HP1630
SKU: HP1631
BLUE BOAR 3-1/8" (80mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 3-3/8" (86mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 3-1/2" (89mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $35.05
Market price: $47.35 save 26%
Our price: $38.20
Market price: $51.60 save 26%
Our price: $39.85
Market price: $53.80 save 26%
Quantity
Quantity
Quantity
 
BLUE BOAR 3-5/8" (92mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 4" (102mm) MEGA Tungsten Carbide 2-1/4" deep hole saw BLUE BOAR 4-1/8" (105mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
SKU: HP1632
SKU: HP1633
SKU: HP1634
BLUE BOAR 3-5/8" (92mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 4" (102mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
BLUE BOAR 4-1/8" (105mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
Our price: $41.05
Market price: $53.80 save 24%
Our price: $44.95
Market price: $60.70 save 26%
Our price: $46.40
Market price: $62.65 save 26%
Quantity
Quantity
Quantity
  •  per page