Adjustable Hole Saw Cutter

Adjustable Hole Saw Cutter

Adjustable Hole Saw Cutter

The Hole Cutter Store specializes in professional grade hole saw cutting tools including the Hole Pro Adjustable hole saw cutter with their Patented Tri-slot Safety Shield and Dust Collectors.

Hole saw cutter shields are made of high impact plastic, the ABS safety shield has special slots to collect shavings so the work piece remains clearly visible throughout the cutting operation.

Products

Hole Pro HHT-200 1-9/16 to 8" Twin Blade Adjust Cutter

Use X models (X-230+ (9-1/4" max hole size), or X-305 (12" max hole size)) for commercial production use.
• HHT drill press models are for hobby use.
• Uses HSS or Tungsten Carbide twin blades to cut veneer, plywood, OSB, MDF, plaster board, acrylic sheet, thin asbestos slate, as well as thick asbestos slate, and most hard materials.
• Uses replacement HSS blade set (BH-002), or Tungsten Carbide blade set (BT-002)

**Intended for use in a stationary drill press.

HP1150

$39.95

Hole Pro HT-200: 1 9/16" to 8" Twin Blade Adjustable Hole Cutter

Use X models (X-230+ (9-1/4" max hole size), or X-305 (12" max hole size)) for commercial production use.
• HT drill press models are for hobby use.
• Uses Tungsten Carbide twin blades to cut sheetrock, plaster, fiber-cement board, mdf, fiberglass, plywood, OSB and most hard materials.
• Uses tungsten carbide replacement blade set BT-002
Intended for use in a stationary drill press.

HP1115

$34.95

Hole Pro HH-200 1-9/16 to 8" Twin Blade Adjust Cutter

Use X models (X-230+ (9-1/4" max hole size), or X-305 (12" max hole size)) for commercial production use.
• HH drill press models are for hobby use.
• Uses High Speed Steel twin blades to cut veneer, wood, acoustic ceiling tiles
• Replacement blade set, item number BH-002.

Intended for use in a stationary drill press.

HP1112

$24.95

Hole Pro Large (9" Diameter) Hole Saw Shield & XL-Arbor

The Hole Pro Large (9" Diameter) Shield kit comes with the following components:
• ABS (11-1/4" OD) transparent shield with ball bearing mount
• Orange adjustment knob
• XL Arbor
• Yellow storage pouch
• Tensioning spring
• Release bar
• Hex wrench
• High Speed Steel pilot bit
• Includes pre-cut hole with plastic plug in shield for use when NOT using Optional Vacuum Adapter
• Spacer disk

** Vacuum adapter NOT INCLUDED**
** Hole Saw NOT INCLUDED**

HP1156

$99.95

Hole Pro Hole Enlarger Tool Kit

Hole Pro Hole Enlarger Tool 5-Piece Kit
• For enlarging existing holes 3" to 6" in size
• New hole must be at least 1" larger than existing hole.
• Works with any hole saw arbor adapter with ¼” pilot bit and with all Hole Pro Twin Blade Adjustable hole cutters for super size holes up to 17 inches in diameter.
• No need to buy a hole saw the size of the existing holes to be enlarged
• No problems with having two hole saws mounted and having them jam and difficult to remove from an adapter

HP1185

$14.99

Hole Pro XL-Arbor: Use with threaded hole saw and Hole Pro shield

Hole Pro XL-Arbor Hole Saw adapter comes with the following components:
• XL Arbor
• Yellow storage pouch
• Tensioning spring
• Release bar
• Hex wrench
• High Speed Steel pilot
The unique dual-head design permits mounting either 5/8”-18 or 1/2”-20 threaded hole saws without the need for two arbors or special adapters.

HP1168

$48.95

Hole Pro BT-002: 3 pack - Tungsten Carbide Blades

3 Pack of BT-002 (HP1162) Tungsten Carbide Blade Set; Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, MDF, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HHT-200, HT-200 Hole Cutters.

NOT for use with T-200 model

HP1162-3PK

$53.95

Hole Pro Arbor HP1168 6mm Replacement Pilot Bit

Replacement HSS Pilot Bit 6mm
• For use with Hole Pro XL Arbor Kit (HP1168)

HP1198

$8.50

Hole Pro X-148: 1 7/8" to 6" Twin Blade Adjustable Hole Cutter Kit

Faster Cutting
• No balance bars to change or break
• Perfect balance
• Cuts plywood, wood, sheetrock, plaster, MDF, fiberglass, ceiling tiles
• Cutting thickness - 1" (25mm) ** 2" when can be cut from both sides.
• Has 3/8" shank
• Shield has 8" OD
• Includes 1 HSS blade set in the carry case and 1 Tungsten Carbide blade set in the hole cutter, both are usuer replaceable
• 5 year warranty against defects (except when used in commercial drill presses)

HP1152

$122.95

Hole Pro HH-300: 1 9/16" to 12" Drill Press Model Adjustable Hole Cutter

Use X models (X-230+ (9-1/4" max hole size), or X-305 (12" max hole size)) for commercial production use.
HH drill press models are for hobby use.
Uses High Speed Steel twin blades to cut veneer, wood, acoustic ceiling tiles.
Uses replacement blade set, item number BH-002. Intended for use in stationary drill press.

HP1118

$24.95

Hole Pro X-425: 1 7/8" to 17" Twin Blade Adjustable Hole Cutter Kit

Twin blade user-replaceable, multi-functional hole cutter for cutting exact sized holes from 1 7/8" to 17". Kit includes hole cutter, ABS safety shield, High Speed Steel and Tungsten Carbide blade sets, adjustment hex wrenches, sturdy carry case.

Replacement blades, order BH-002 (HSS) or BT-002 Tungsten Carbide.

** Shield has 19" OD

HP1178

$174.95

7mm HSS Pilot Bit -for Hole Pro X & H models

Replacement HSS pilot bit for Hole Pro adjustable hole cutters. (X, HH, HT, and HHT models)
• Packaged with 2 pilot bits
NOT for Hole Pro Model T-200 which uses 1/4" pilot bit

HP1197

$13.90

Hole Pro X-305: 1 7/8" to 12" Twin Blade Adjustable Hole Cutter Kit

Twin blade user-replaceable, multi-functional hole cutter for cutting exact sized holes from 1 7/8" to 12". Kit includes hole cutter, ABS safety shield, High Speed Steel and Tungsten Carbide blade sets, adjustment hex wrenches, sturdy carry case.

HP1104

$152.95

Hole Pro Small (6" Diameter) Hole Saw Shield & XL-Arbor

The Hole Pro Small (6" Diameter) Shield (HP1171) and XL Arbor (HP1168) kit comes with the following components:
• ABS (8" OD) transparent shield with ball bearing mount
• Orange adjustment knob
• XL Arbor
• Yellow storage pouch
• Tensioning spring
• Release bar
• Hex wrench
• High Speed Steel pilot bit
• Includes pre-cut hole with plastic plug in shield for use when NOT using Optional Vacuum Adapter
• Spacer disk

**** Large 9" Model XL Shield and XL Arbor kit see SKU  HP1156 *****

** Vacuum adapter NOT INCLUDED**
** Hole Saw NOT INCLUDED**

HP1168-71

$89.95

Hole Pro Shield Vacuum Adapter for all Hole Pro shields

For use with Hole Pro shields for dust control in HEPA required environments

HP1174

$22.95

Hole Pro BH-002 HSS Blades for X & H Twin Blade models

These are quality high speed steel blades that produce a fine kerf and are ideal for wood, most plastics, and acoustic ceiling tile. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HH-300, HHT-200, HH-200 Hole Cutters.

NOT for use with T-200 model

HP1160

$12.95

Hole Pro X-230+: 1-7/8" to 9-1/4" Twin Blade Adjustable Hole Cutter

Twin blade user-replaceable, multi-functional hole cutter for cutting exact sized holes from 1 7/8" to 9-1/4". Kit includes hole cutter, ABS safety shield, High Speed Steel and Tungsten Carbide blade sets, adjustment hex wrenches, sturdy carry case.

Includes new 5/8" threaded shaft end for using the hole cutter with standard carbide grit holes saws up to 1-1/4 inch cutting depth (recommend Blue Boar carbide grit recessed light design hole cutters).

HP1180

$132.95

Hole Pro BT-002: Tungsten Carbide Blades: use with X and H Twin Blade models

Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, MDF, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HHT-200, HT-200 Hole Cutters.

NOT for use with T-200 model

HP1162

$19.95

Adjustable Hole Saw Cutter

Hole Pro Models

All 4 Hole Pro Twin Blade adjustable hole saw cutter kits are infinitely adjustable versus Single blade models that require balance bars that can easily break and have finite adjustment settings. Each kit comes in its own carry case with replaceable tungsten carbide blades in the hole cutter and high speed steel (HSS) blades snapped in the carry case. The dust shield acts like a portable drill press to the cutting surface, keeping the tool perpendicular to cut a perfect circle hole and contain the dust.

  • Model and Cutting size
    • X-148 : cut holes 1-7/8” to 6”
    • X-230+ : cut holes 1-7/8” to 9-1/4”
      also includes a 5/8” threading on the end of the shaft to allow use of a 1” deep carbide grit hole saw often used by electricians.
    • X-305 : cut holes 1-7/8” to 12”
    • X-425 : cut holes 1-7/8” to 17”

Video cutting sheetrock with the optional vacuum adapter accessory Hole Pro Twin Blade Adjustable Hole Cutter with Vacuum Adapter cutting Sheetrock

Hole Pro Adjustable Hole Saw Cutter Accessories

  • The HP1168 arbor adapter can be used with any Hole Pro shield with a hole saw up to 2 ½” deep with the maximum diameter of the shield
  • The HP1168-71 6” shield kit can be used with any 2 ½” deep hole saw with a diameter of 2” to 6” diameter
  • The HP1156 9” shield kit can be used with any 2 ½” deep hole saw with a diameter of 2” to 9” diameter
  • The HP1174 vacuum adapter can optionally be used with any Hole Pro shields where lead paint, asbestos, hospital, food environments require all dust to be vacuumed into a hepa vacuum
  • The HP1185 hole enlarger tool can optionally be used to increase the size of an existing hole
  • Tungsten carbide HP1162 and high speed steel HP1160 blades and pilot bits are easily replaced