Adjustable Hole Saw Cutter

Faster Cutting
• No balance bars to change or break
• Perfect balance
• Cuts plywood, wood, sheetrock, plaster, MDF, fiberglass, ceiling tiles
• Cutting thickness - 1 1/8" ** 2 1/4" when can be cut from both sides.
• Has 3/8" shank
• Shield has 8" OD
• Includes 1 HSS blade set in the carry case and 1 Tungsten Carbide blade set in the hole cutter, both are user replaceable

Twin blade user-replaceable, multi-functional hole cutter for cutting exact sized holes from 1 7/8" to 9-1/4". Kit includes hole cutter, ABS safety shield, High Speed Steel and Tungsten Carbide blade sets, adjustment hex wrenches, sturdy carry case. Strong ½” cross bar & heat treated shaft.

Includes new 5/8" threaded shaft end for using the hole cutter with standard carbide grit holes saws up to 1-1/4 inch cutting depth (recommend Blue Boar carbide grit recessed light design hole cutters).

Heavy Duty Twin blade user-replaceable, multi-functional hole cutter for cutting exact sized holes from 1 7/8" to 12". Hole Cutter has strong ½” cross bar & heat treated shaft. Kit includes hole cutter, ABS safety shield, High Speed Steel and Tungsten Carbide blade sets, adjustment hex wrenches, sturdy carry case.

Twin blade user-replaceable, multi-functional hole cutter for cutting exact sized holes from 1 7/8" to 17". Kit includes hole cutter, ABS safety shield, High Speed Steel and Tungsten Carbide blade sets, adjustment hex wrenches, sturdy carry case.

Replacement blades, order BH-002 (HSS) or BT-002 Tungsten Carbide.

** Shield has 19" OD

The Hole Pro Small (6" Diameter) Shield (HP1171) and XL Arbor (HP1168) kit comes with the following components:
• ABS (8" OD) transparent shield with ball bearing mount
• Orange adjustment knob
• XL Arbor for all 1/2"-20 and 5/8"-18 threaded hole saws up to 2-1/4" (60mm) cutting depth
• Yellow storage pouch
• Tensioning spring
• Release bar
• Hex wrench
• High Speed Steel pilot bit
• Includes pre-cut hole with plastic plug in shield for use when NOT using Optional Vacuum Adapter
• Spacer disk

**** Large 9" Model XL Shield and XL Arbor kit see SKU  HP1156 *****

** Vacuum adapter NOT INCLUDED**
** Hole Saw NOT INCLUDED**
** Replacement 6mm HSS Pilot Bit SKU HP1198**

The Hole Pro Large (9" Diameter) Shield kit comes with the following components:
• ABS (11-1/4" OD) transparent shield with ball bearing mount
• Orange adjustment knob
• XL Arbor for all 1/2"-20 and 5/8"-18 threaded hole saws up to 2-1/4" (60mm) cutting depth
• Yellow storage pouch
• Tensioning spring
• Release bar
• Hex wrench
• High Speed Steel pilot bit
• Includes pre-cut hole with plastic plug in shield for use when NOT using Optional Vacuum Adapter
• Spacer disk

** Vacuum adapter NOT INCLUDED**
** Hole Saw NOT INCLUDED**
** Replacement 6mm HSS Pilot Bit SKU HP1198**

Hole Pro XL-Arbor Hole Saw adapter comes with the following components:
• XL Arbor
• Yellow storage pouch
• Tensioning spring
• Release bar
• Hex wrench
• High Speed Steel pilot
• Replacement 6mm HSS Pilot Bit SKU HP1198
The unique dual-head design permits mounting either 5/8”-18 or 1/2”-20 threaded hole saws without the need for two arbors or special adapters.

Hole Pro Hole Enlarger Tool 5-Piece Kit
• For enlarging existing holes 3" to 6" in size
• New hole must be at least 1" larger than existing hole.
• Works with any hole saw arbor adapter with ¼” pilot bit and with all Hole Pro Twin Blade Adjustable hole cutters (with their 7mm pilot bit) for super size holes up to 17 inches in diameter.
• No need to buy a hole saw the size of the existing holes to be enlarged
• No problems with having two hole saws mounted and having them jam and difficult to remove from an adapter

For use with Hole Pro shields for dust control in HEPA required environments

Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, MDF, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HHT-200, HT-200 Hole Cutters.

NOT for use with T-200 model

3 Pack of BT-002 (HP1162) Tungsten Carbide Blade Set; Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, MDF, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HHT-200, HT-200 Hole Cutters.

NOT for use with T-200 model

These are quality high speed steel blades that produce a fine kerf and are ideal for wood, most plastics, and acoustic ceiling tile. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HH-300, HHT-200, HH-200 Hole Cutters.

NOT for use with T-200 model

Replacement HSS pilot bit for Hole Pro adjustable hole cutters. (X, HH, HT, and HHT models)
• Packaged with 2 pilot bits
NOT for Hole Pro Model T-200 which uses 1/4" pilot bit

Not for commercial production use.
• HT drill press models are for hobby use.
• Uses Tungsten Carbide twin blades to cut sheetrock, plaster, fiber-cement board, mdf, fiberglass, plywood, OSB and most hard materials.
• Uses tungsten carbide replacement blade set BT-002
Intended for use in a stationary drill press.

Not for commercial production use.
HH drill press models are for hobby use not for production work.
Uses High Speed Steel twin blades to cut veneer, wood, acoustic ceiling tiles.
Uses replacement blade set, item number BH-002. Intended for use in stationary drill press.

Not for commercial production use.
• HH drill press models are for hobby use.
• Uses High Speed Steel twin blades to cut veneer, wood, acoustic ceiling tiles
• Replacement blade set, item number BH-002.

Intended for use in a stationary drill press.

Not for commercial production use.
• HHT drill press models are for hobby use.
• Uses HSS or Tungsten Carbide twin blades to cut veneer, plywood, OSB, MDF, plaster board, acrylic sheet, thin asbestos slate, as well as thick asbestos slate, and most hard materials.
• Uses replacement HSS blade set (BH-002), or Tungsten Carbide blade set (BT-002)
**Intended for use in a stationary drill press.

Replacement HSS Pilot Bit 6mm
• For use with Hole Pro Small Shield and Arbor Kit (HP1168-71)
• For use with Hole Pro Large Shield and Arbor Kit (HP1156)
• For use with Hole Pro XL Arbor Kit (HP1168)