Blue Boar Professional Grade Carbide Hole Saws

Blue Boar

more...
Blue Boar tungsten carbide and carbide grit hole saws

Products

Blue Boar 1-1/2” (38mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1414

$48.95

Blue Boar 1-1/4” (32mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1412

$46.95

Blue Boar 1-1/8” (29mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, 2-1/8" cutting depth, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1411

$45.95

Blue Boar 1-3/8” (35mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1413

$47.95

Blue Boar 1" (25mm) carbide 2-1/4" deep hole saw

Technical Details
• 1" (25mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 1/2"-20 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1612

$11.00

Blue Boar 1-1/2" (38mm) carbide 2-1/4" deep hole saw

Technical Details
• 1-1/2" (38mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1616

$15.00

Blue Boar 1-1/2” (38mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

Use with any corded or cordless drill in NON-hammer mode.

HP1444

$48.95

Blue Boar 1-1/4" (32mm) carbide 2-1/4" deep hole saw

Technical Details
• 1-1/4" (32mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 1/2"-20 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1614

$15.40

Blue Boar 1-1/8" (29mm) carbide 2-1/4" deep hole saw

Technical Details
• 1-1/8" (29mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 1/2"-20 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1613

$14.05

Blue Boar 1-3/4" (45mm) carbide 2-1/4" deep hole saw

Technical Details
• 1-3/4" (44mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1618

$15.50

Blue Boar 1-3/4” (45mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1416

$50.50

Blue Boar 1-3/8" (35mm) carbide 2-1/4" deep hole saw

Technical Details
• 1-3/8" (35mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1615

$14.75

Blue Boar 1-5/8" (41mm) carbide 2-1/4" deep hole saw

Technical Details
• 1-5/8" (41mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1617

$15.25

Blue Boar 1-5/8” (41mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1415

$49.95

Blue Boar 1-7/8" (48mm) carbide 2-1/4" deep hole saw

Technical Details
• 1-7/8" (48mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 2 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1619

$15.75

Blue Boar 1/4" x 3-3/4" Carbide Porcelain Pilot Bit

Blue Boar 1/4" x 3-3/4" Carbide Porcelain Point Pilot Bit in plastic tube

HP1595

$5.99

Blue Boar 1/4" x 3-3/4" Carbide tipped Masonry Pilot Bit

Blue Boar 1/4" x 3-3/4" Carbide tipped Masonry Pilot Bit in plastic tube

HP1592

$4.49

Blue Boar 1/4" x 3-3/4" Flat Wood Spade Pilot Bit

Blue Boar 1/4" x 3-3/4" Flat Wood Spade Pilot Bit in plastic tube

HP1593

$3.89

Blue Boar 1/4" x 3-3/4" HSS Pilot bit

Blue Boar 1/4" x 3-3/4" HSS Pilot Bit in plastic tube

HP1594

$3.99

Blue Boar 1/4" x 3-7/8" Carbide Pilot bit

Blue Boar 1/4" x 3-7/8" TCT Pilot Bit in plastic tube
• Good for use on hard and engineered woods, MDF, particle board, OSB, plywood, etc.
• The tapered shaft provides easy plug removal. Bores faster and stays sharp longer than carbon steel spade bit and high speed steel twist pilot bits

HP1598

$6.99

Blue Boar 1/4" x 4-1/4" Carbide Pilot bit

Blue Boar 1/4" x 4-1/4" TCT Pilot Bit in plastic tube
• Good for use on hard and engineered woods, MDF, particle board, OSB, plywood, etc.
• The tapered shaft provides easy plug removal. Bores faster and stays sharp longer than carbon steel spade bit and high speed steel twist pilot bits

HP1599

$7.49

Blue Boar 1” (25mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, 2-1/8" cutting depth, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1410

$44.95

Blue Boar 2" (51mm) carbide 2-1/4" deep hole saw

Technical Details
• 2" (51mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

HP1620

$16.00

Blue Boar 2-1/16" (52mm) carbide 2-1/4" deep hole saw

Technical Details
• 2-1/16" (52mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1621

$16.50

Blue Boar 2-1/2" (64mm) carbide 2-1/4" deep hole saw

Technical Details
• 2-1/2" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1624

$17.50

Blue Boar 2-1/2” (64mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

HP1450

$64.95

Blue Boar 2-1/4" (57mm) carbide 2-1/4" deep hole saw

Technical Details
• 2-1/4" (57mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide tooth
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1623

$17.30

Blue Boar 2-1/8" (54mm) carbide 2-1/4" deep hole saw

Technical Details
• 2-1/8" (54mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1622

$16.80

Blue Boar 2-1/8” (54mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

HP1448

$58.95

Blue Boar 2-3/4" (70mm) carbide 2-1/4" deep hole saw

Technical Details
• 2-3/4" (70mm) MEGA Tungsten Carbide 2-1/4" deep hole saw
• 3 TCT carbide teeth or more
• Cut 3 times as large a hole using cordless hand drills than with a bi-metal hole saw
• Cuts wood, sheetrock, fiber cement board, plaster, fiberglass, OSB, chipboard, MDF, and other tough materials
• Use any 5/8"-18 thread hole saw arbor and any standard 3-3/4" or longer pilot bit
• Do NOT use with 1/2" stud drills such as Milwaukee Hole Hawg which will cause the teeth to rip off
• USE on cordless drill MEDIUM to HIGH SETTING for best results

***Arbor and pilot bit NOT INCLUDED***

HP1627

$20.00

Blue Boar

carbide grit hole saw