Home :: Adjustable Hole Cutters :: Hole Pro Shield Vacuum Adapter for all Hole Pro shields

Hole Pro Shield Vacuum Adapter for all Hole Pro shields

Hole Pro Shield Vacuum Adapter for all Hole Pro shields

For use with Hole Pro shields for dust control in HEPA required environments
Installation and usage instructions

Using a 1-3/8" (35mm) hole saw, cut a hole in the top of the Hole Pro shield at a point where the hole saw pilot bit is exactly 1-1/4” (32mm) from outer edge of the shield. The adapter’s hole location needs to be close to the inner edge of the shield while leaving room for the Hole Pro Vacuum Adapter’s flange. to sit flat. Vacuum suction will be best at the edge of the shield and this location helps to keep the vacuum hose out of the way while cutting holes using the shield.

When using with the XL-Arbor Adapter it is important to use the 2 flat washers from the kit between the arbor and the hole saw for clearance between the base of the hole saw and the Hole Pro Vacuum Adapter.

It helps to first make a puncture in the ceiling or wall inside the area to be cut allowing air to enter the shield while cutting, or tilt the shield to let air in to aid the vacuum to easily suck out all the dust.

Due to design of the tri-slot shields the shavings that collect in the slots when cutting overhead may not be sucked out by the vacuum. The solution is to apply clear packaging tape over shield’s slots.  The tape is easily removed to return to using the shield without a vacuum.

8%
Details
SKU HP1174
Ship Weight 1.00 lbs
 
Market price: $24.95
Our price: $22.95
Options
Quantity
: *
: *
: *
 
 
Hole Pro X-305: 1 7/8" to 12" Twin Blade Adjustable Hole Cutter Kit
Hole Pro BH-002 HSS Blades for X & H Twin Blade models
Hole Pro BT-002: Tungsten Carbide Blades:  use with X and H Twin Blade models
Hole Pro X-305: 1 7/8" to 12" Twin Blade Adjustable Hole Cutter Kit Hole Pro BH-002 HSS Blades for X & H Twin Blade models Hole Pro BT-002: Tungsten Carbide Blades: use with X and H Twin Blade models
$152.95
$12.95
$19.95
 
Hole Pro X-230+: 1-7/8" to 9-1/4" Twin Blade Adjust Hole Cutter
7mm HSS Pilot Bit -for Hole Pro X & H models
Hole Pro Small (6" Diameter) Hole Saw Shield & XL-Arbor
Hole Pro X-230+: 1-7/8" to 9-1/4" Twin Blade Adjust Hole Cutter 7mm HSS Pilot Bit -for Hole Pro X & H models Hole Pro Small (6" Diameter) Hole Saw Shield & XL-Arbor
$132.95
$13.90
$89.95
 
Hole Pro Arbor HP1168 6mm Replacement Pilot Bit
Hole Pro BT-002: 3 pack - Tungsten Carbide Blades
Hole Pro Large (9" Diameter) Hole Saw Shield & XL-Arbor
Hole Pro Arbor HP1168 6mm Replacement Pilot Bit Hole Pro BT-002: 3 pack - Tungsten Carbide Blades Hole Pro Large (9" Diameter) Hole Saw Shield & XL-Arbor
$8.50
$53.95
$99.95