Pilot Bit & Blades

Dual Arbor and Hole saw starter case kit with 3 pilot bits includes:
• Heavy duty molded case
• Carbide tipped masonry pilot drill bit
• Porcelain pilot drill bit
• 5/8”-18 thread   2-pin hole saw arbor adapter with HSS pilot bit
• Use 5/8”-18 2-pin mount for hole saws 1-1/4” and larger and ½”-20 adapter for smaller hole saw sizes

Hole Pro Hole Enlarger Tool 5-Piece Kit
• For enlarging existing holes 3" to 6" in size
• New hole must be at least 1" larger than existing hole.
• Works with any hole saw arbor adapter with ¼” pilot bit and with all Hole Pro Twin Blade Adjustable hole cutters for super size holes up to 17 inches in diameter.
• No need to buy a hole saw the size of the existing holes to be enlarged
• No problems with having two hole saws mounted and having them jam and difficult to remove from an adapter

One Arbor Kit provides two Hole Saw arbor mandrels that store in the space of one ordinary arbor
• Use 5/8”-18 2-pin mount for hole saws 1-1/4” and larger ½”-20 adapter for smaller hole saw sizes
• 7/16-inch hex shank for greater gripping capability in the chuck. Use with standard arbor extension
• Comes with standard ¼” high speed steel pilot drill bit
• For all hole saws from 5/8 inch to 7 inches in diameter

Blue Boar 1/4" x 3-3/4" Carbide tipped Masonry Pilot Bit in plastic tube

Blue Boar 1/4" x 3-3/4" Flat Wood Spade Pilot Bit in plastic tube

Blue Boar 1/4" x 3-3/4" HSS Pilot Bit in plastic tube

Blue Boar 1/4" x 3-3/4" Carbide Porcelain Point Pilot Bit in plastic tube

Blue Boar 1/4" x 3-7/8" TCT Pilot Bit in plastic tube
• Good for use on hard and engineered woods, MDF, particle board, OSB, plywood, etc.
• The tapered shaft provides easy plug removal. Bores faster and stays sharp longer than carbon steel spade bit and high speed steel twist pilot bits

Blue Boar 1/4" x 4-1/4" TCT Pilot Bit in plastic tube
• Good for use on hard and engineered woods, MDF, particle board, OSB, plywood, etc.
• The tapered shaft provides easy plug removal. Bores faster and stays sharp longer than carbon steel spade bit and high speed steel twist pilot bits

Blue Boar SDS-plus 8" (200mm) L adapter M16 thread, 3/8" (10mm) carbide pilot bit, spring, screw, in plastic tube for all Blue Boar Stucco & FRP TCT hole cutters

For use in all Blue Boar TCT Stucco & Wood hole saws

Replacement Metal Pro 5x60mm Pilot Bit
For use with Blue Boar TCT Metal Pro SKUs that are 1" and smaller:
• ML8-010
• ML8-020
• ML8-030
• ML8-040

Replacement Metal Pro 6mm Pilot Bit
For use with Blue Boar TCT Metal Pro SKUs that are 1-1/8" and greater

These are quality high speed steel blades that produce a fine kerf and are ideal for wood, most plastics, and acoustic ceiling tile. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HH-300, HHT-200, HH-200 Hole Cutters.

NOT for use with T-200 model

Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, MDF, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HHT-200, HT-200 Hole Cutters.

NOT for use with T-200 model

3 Pack of BT-002 (HP1162) Tungsten Carbide Blade Set; Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, MDF, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HHT-200, HT-200 Hole Cutters.

NOT for use with T-200 model

Replacement HSS pilot bit for Hole Pro adjustable hole cutters. (X, HH, HT, and HHT models)
• Packaged with 2 pilot bits
NOT for Hole Pro Model T-200 which uses 1/4" pilot bit

Hole Pro XL-Arbor Hole Saw adapter comes with the following components:
• XL Arbor
• Yellow storage pouch
• Tensioning spring
• Release bar
• Hex wrench
• High Speed Steel pilot
The unique dual-head design permits mounting either 5/8”-18 or 1/2”-20 threaded hole saws without the need for two arbors or special adapters.

Replacement HSS Pilot Bit 6mm
• For use with Hole Pro XL Arbor Kit (HP1168)

Adapts dry cutting core bits with their 5/8"-11 female threads for use with standard 1/2" electric drill chucks