Pilot Bits & Blades

Pilot Bits & Blades

Pilot Bits & Blades

Hole Pro adjustable hole cutter and Blue Boar hole saw replacement blades and pilot bits and adapters.

Products

Hole Pro BH-002 HSS Blades for X & H Twin Blade models

These are quality high speed steel blades that produce a fine kerf and are ideal for wood, most plastics, and acoustic ceiling tile. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HH-300, HHT-200, HH-200 Hole Cutters.

NOT for use with T-200 model

HP1160

$12.95

Hole Pro BT-002: Tungsten Carbide Blades: use with X and H Twin Blade models

Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, MDF, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HHT-200, HT-200 Hole Cutters.

NOT for use with T-200 model

HP1162

$19.95

Hole Pro BT-002: 3 pack - Tungsten Carbide Blades

3 Pack of BT-002 (HP1162) Tungsten Carbide Blade Set; Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, MDF, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-230+, X-305, X-425, HHT-200, HT-200 Hole Cutters.

NOT for use with T-200 model

HP1162-3PK

$53.95

Hole Pro XL-Arbor: Use with threaded hole saw and Hole Pro shield

Hole Pro XL-Arbor Hole Saw adapter comes with the following components:
• XL Arbor
• Yellow storage pouch
• Tensioning spring
• Release bar
• Hex wrench
• High Speed Steel pilot
The unique dual-head design permits mounting either 5/8”-18 or 1/2”-20 threaded hole saws without the need for two arbors or special adapters.

HP1168

$48.95

Hole Pro Hole Enlarger Tool Kit

Hole Pro Hole Enlarger Tool 5-Piece Kit
• For enlarging existing holes 3" to 6" in size
• New hole must be at least 1" larger than existing hole.
• Works with any hole saw arbor adapter with ¼” pilot bit and with all Hole Pro Twin Blade Adjustable hole cutters for super size holes up to 17 inches in diameter.
• No need to buy a hole saw the size of the existing holes to be enlarged
• No problems with having two hole saws mounted and having them jam and difficult to remove from an adapter

HP1185

$14.99

7mm HSS Pilot Bit -for Hole Pro X & H models

Replacement HSS pilot bit for Hole Pro adjustable hole cutters. (X, HH, HT, and HHT models)
• Packaged with 2 pilot bits
NOT for Hole Pro Model T-200 which uses 1/4" pilot bit

HP1197

$13.90

Hole Pro Arbor HP1168 6mm Replacement Pilot Bit

Replacement HSS Pilot Bit 6mm
• For use with Hole Pro XL Arbor Kit (HP1168)

HP1198

$8.50

Blue Boar 5/8"-11 to 7/16" Adapter

Adapts dry cutting core bits with their 5/8"-11 female threads for use with standard 1/2" electric drill chucks

HP12-ADPTR

$14.99

Blue Boar SDS-plus 8" (200mm) L adapter M16 thread, 3/8" (10mm) carbide pilot bit, spring, screw, in plastic tube

Blue Boar SDS-plus 8" (200mm) L adapter M16 thread, 3/8" (10mm) carbide pilot bit, spring, screw, in plastic tube for all Blue Boar Stucco & FRP TCT hole cutters

HP1470

$20.99

Blue Boar 5/16" x 4-1/8 Pilot Bit

For use in all Blue Boar TCT Stucco & Wood hole saws

HP1471

$4.99

Blue Boar 1/4" x 3-3/4" Carbide tipped Masonry Pilot Bit

Blue Boar 1/4" x 3-3/4" Carbide tipped Masonry Pilot Bit in plastic tube

HP1592

$4.49

Blue Boar 1/4" x 3-3/4" Flat Wood Spade Pilot Bit

Blue Boar 1/4" x 3-3/4" Flat Wood Spade Pilot Bit in plastic tube

HP1593

$3.89

Blue Boar 1/4" x 3-3/4" HSS Pilot bit

Blue Boar 1/4" x 3-3/4" HSS Pilot Bit in plastic tube

HP1594

$3.99

Blue Boar 1/4" x 3-3/4" Carbide Porcelain Pilot Bit

Blue Boar 1/4" x 3-3/4" Carbide Porcelain Point Pilot Bit in plastic tube

HP1595

$5.99

Blue Boar Dual Arbor and Hole saw starter case kit with 3 pilot bits

Dual Arbor and Hole saw starter case kit with 3 pilot bits includes:
• Heavy duty molded case
• Carbide tipped masonry pilot drill bit
• Porcelain pilot drill bit
• 5/8”-18 thread   2-pin hole saw arbor adapter with HSS pilot bit
• Use 5/8”-18 2-pin mount for hole saws 1-1/4” and larger and ½”-20 adapter for smaller hole saw sizes

HP1596

$18.95

Blue Boar 7/16-inch shank Dual Arbor Mandrel Kit

One Arbor Kit provides two Hole Saw arbor mandrels that store in the space of one ordinary arbor
• Use 5/8”-18 2-pin mount for hole saws 1-1/4” and larger ½”-20 adapter for smaller hole saw sizes
• 7/16-inch hex shank for greater gripping capability in the chuck. Use with standard arbor extension
• Comes with standard ¼” high speed steel pilot drill bit
• For all hole saws from 5/8 inch to 7 inches in diameter

HP1597

$12.99

Blue Boar 1/4" x 3-7/8" Carbide Pilot bit

Blue Boar 1/4" x 3-7/8" TCT Pilot Bit in plastic tube
• Good for use on hard and engineered woods, MDF, particle board, OSB, plywood, etc.
• The tapered shaft provides easy plug removal. Bores faster and stays sharp longer than carbon steel spade bit and high speed steel twist pilot bits

HP1598

$6.99

Blue Boar 1/4" x 4-1/4" Carbide Pilot bit

Blue Boar 1/4" x 4-1/4" TCT Pilot Bit in plastic tube
• Good for use on hard and engineered woods, MDF, particle board, OSB, plywood, etc.
• The tapered shaft provides easy plug removal. Bores faster and stays sharp longer than carbon steel spade bit and high speed steel twist pilot bits

HP1599

$7.49

Blue Boar Replacement Metal Pro 5x60mm Pilot Bit

Replacement Metal Pro 5x60mm Pilot Bit
For use with Blue Boar TCT Metal Pro SKUs that are 1" and smaller:
• ML8-010
• ML8-020
• ML8-030
• ML8-040

ML8-005

$6.99

Blue Boar Replacement Metal Pro 6x60mm Pilot Bit

Replacement Metal Pro 6mm Pilot Bit
For use with Blue Boar TCT Metal Pro SKUs that are 1-1/8" and greater:

ML8-006

$7.99