Stucco & Fiberglass Hole Saw Cutter

Stucco & Fiberglass Hole Saw Cutter

Blue Boar Tungsten Carbide Tipped TCT hole saws with 2-1/8" cutting depth, quickly bore holes in stucco, brick, FRP, fiberglass, OSB, plaster & lath, plywood sheathing, clay pipe, Hardie cement board, wood with nails, aluminum siding, hard or composite plastic.

Designed with deep side gullets for rapid cutting and fast plug removal of holes in masonry and wood and composite materials.

Engineered with a unique tooth design and using premium grade tungsten carbide tips, the hole cutters are able to withstand the demands of cutting through masonry while maintaining a cutting edge that cuts effectively through hard and soft wood, plywood, OSB, and chipboard

Quick View
Blue Boar 1” (25mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, 2-1/8" cutting depth, ejection spring

Blue Boar 1” (25mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, 2-1/8" cutting depth, ejection spring

HP1410

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$85.00

$44.95

47% Off  
Quantity
Quick View
Blue Boar 1-1/8” (29mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, 2-1/8" cutting depth, ejection spring

Blue Boar 1-1/8” (29mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, 2-1/8" cutting depth, ejection spring

HP1411

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$86.00

$45.95

47% Off  
Quantity
Quick View
Blue Boar 1-1/4” (32mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Blue Boar 1-1/4” (32mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

HP1412

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$88.00

$46.95

47% Off  
Quantity
Quick View
Blue Boar 1-3/8” (35mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Blue Boar 1-3/8” (35mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

HP1413

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$89.00

$47.95

46% Off  
Quantity
Quick View
Blue Boar 1-1/2” (38mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Blue Boar 1-1/2” (38mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

HP1414

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$90.00

$48.95

46% Off  
Quantity
Quick View
Blue Boar 1-1/2” (38mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

Blue Boar 1-1/2” (38mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

HP1444

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

Use with any corded or cordless drill in NON-hammer mode.

$90.00

$48.95

46% Off  
Quantity
Quick View
Blue Boar 1-5/8” (41mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Blue Boar 1-5/8” (41mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

HP1415

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$90.00

$49.95

44% Off  
Quantity
Quick View
Blue Boar 1-3/4” (45mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Blue Boar 1-3/4” (45mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

HP1416

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$91.00

$50.50

45% Off  
Quantity
Quick View
Blue Boar 2” (51mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

Blue Boar 2” (51mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

HP1447

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

$99.00

$56.95

42% Off  
Quantity
Quick View
Blue Boar 2-1/8” (54mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

Blue Boar 2-1/8” (54mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

HP1448

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

$103.00

$58.95

43% Off  
Quantity
Quick View
Blue Boar 2-1/2” (64mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

Blue Boar 2-1/2” (64mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

HP1450

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

$99.00

$64.95

34% Off  
Quantity
Quick View
Blue Boar 2-5/8” (67mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Blue Boar 2-5/8” (67mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

HP1421

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$110.00

$71.95

35% Off  
Quantity
Quick View
Blue Boar 3” (76mm) Stucco, Fiberglass & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

Blue Boar 3” (76mm) Stucco, Fiberglass & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

HP1452

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

$120.00

$78.95

34% Off  
Quantity
Quick View
Blue Boar 3-1/2” (89mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Blue Boar 3-1/2” (89mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

HP1434

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$132.00

$87.95

33% Off  
Quantity
Quick View
Blue Boar 3-5/8” (92mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Blue Boar 3-5/8” (92mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

HP1423

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$136.00

$90.95

33% Off  
Quantity
Quick View
Blue Boar 4-1/4” (108mm) Stucco, Fiberglass & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

Blue Boar 4-1/4” (108mm) Stucco, Fiberglass & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

HP1456

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

$139.20

$96.95

30% Off  
Quantity
Quick View
Blue Boar 4-5/8” (118mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Blue Boar 4-5/8” (118mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

HP1428

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$142.83

$108.95

24% Off  
Quantity
Quick View
Blue Boar 5-1/4” (133mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Blue Boar 5-1/4” (133mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

HP1431

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

$163.85

$124.95

24% Off  
Quantity
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy.
More Information