Stucco & Fiberglass Hole Saw Cutter

Stucco & Fiberglass Hole Saw Cutter

Stucco & Fiberglass Hole Saw Cutter

Blue Boar Tungsten Carbide Tipped TCT hole saws with 2-1/8" cutting depth, quickly bore holes in stucco, brick, FRP, fiberglass, OSB, plaster & lath, plywood sheathing, clay pipe, Hardie cement board, wood with nails, aluminum siding, hard or composite plastic.

Designed with deep side gullets for rapid cutting and fast plug removal of holes in masonry and wood and composite materials.

Engineered with a unique tooth design and using premium grade tungsten carbide tips, the hole cutters are able to withstand the demands of cutting through masonry while maintaining a cutting edge that cuts effectively through hard and soft wood, plywood, OSB, and chipboard

Products

Blue Boar 1-1/2” (38mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1414

$48.95

Blue Boar 1-1/4” (32mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1412

$46.95

Blue Boar 1-1/8” (29mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, 2-1/8" cutting depth, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1411

$45.95

Blue Boar 1-3/8” (35mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1413

$47.95

Blue Boar 1-1/2” (38mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

Use with any corded or cordless drill in NON-hammer mode.

HP1444

$48.95

Blue Boar 1-3/4” (45mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1416

$50.50

Blue Boar 1-5/8” (41mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1415

$49.95

Blue Boar 1” (25mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 8mm carbide pilot bit, 2-1/8" cutting depth, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1410

$44.95

Blue Boar 2-1/2” (64mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

HP1450

$64.95

Blue Boar 2-1/8” (54mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

HP1448

$58.95

Blue Boar 2-5/8” (67mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1421

$71.95

Blue Boar 2” (51mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 8mm carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

HP1447

$56.95

Blue Boar 3-1/2” (89mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1434

$87.95

Blue Boar 3-5/8” (92mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1423

$90.95

Blue Boar 3” (76mm) Stucco, Fiberglass & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

HP1452

$78.95

Blue Boar 4-1/4” (108mm) Stucco, Fiberglass & Wood Tungsten Carbide Tipped TCT Hole Saw with 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic
• Can be used with Hole Pro XL Arbor and XL Shield Kit (HP1168-71) for dust protection.

HP1456

$96.95

Blue Boar 4-5/8” (118mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1428

$108.95

Blue Boar 5-1/4” (133mm) Stucco & Wood Tungsten Carbide Tipped TCT Hole Saw with 4" shank (M16 Thread), 1/4" carbide pilot bit, ejection spring

Stucco Plywood Tungsten Carbide Teeth (TCT) hole saw
• 8mm carbide tipped pilot bit
• 2-1/8" cutting depth, 4” shaft (M16 thread)
• Ejection spring for fast plug removal
• Cutting teeth engineered to cut stucco, fiberglass, Hardie cement board, engineered woods (OSB and plywood), hard or composite plastic

HP1431

$124.95